If your sump pump stops while water is rising, check its power first: the plug, the outlet's reset button and the breaker. Then check that the float isn't stuck. If it still won't run, move belongings off the floor and call. Cornerstone Plumbing in Milford repairs and replaces sump pumps and battery backups: (508) 361-9450.
A sump pump that runs nonstop usually has a stuck float switch, a failed check valve that lets pumped water flow back into the pit, or more water coming in than it can move, which happens with a high water table or an undersized pump. Running constantly wears the motor out fast. Cornerstone Plumbing finds which and fixes it.
Most often it's lost power: a tripped outlet, breaker or loose plug. After that, the usual causes are a float switch stuck in the down position, a jammed impeller or a burned-out motor. If the power is fine and freeing the float doesn't start it, the pump likely needs repair or replacement. Cornerstone Plumbing can replace it.
Many sump pumps last somewhere around 7 to 10 years, less if they run often or sit in a pit full of debris. A pump that's getting old, noisy or slow to clear the pit is worth replacing before a storm rather than during one. Cornerstone Plumbing installs sump pumps and battery backup systems around Milford.
A sump alarm sounds when water in the pit rises above where the pump should have started, so the pump has failed, lost power or can't keep up. Check the power and the float right away, and start moving things off the floor. A battery backup pump takes over in a power cut. Cornerstone Plumbing installs both.
Send the details below and Brandon will get back to you. In a hurry? Call: Cornerstone is open 24 hours for emergencies, and regular hours are Monday–Friday, 8:00 AM–5:00 PM.
Call (508) 361-9450